Pool Deck Cleaning for Exposed Aggregate is one of the jobs we do most often in Covina, CA. Typical jobs cost $200-$500, and you approve the price before we begin. With exposed aggregate, the right approach is moderate-pressure wash.
The right method for the job
Cleaning solution: A concrete pre-treatment and degreaser as needed.
Caring for exposed aggregate
Exposed aggregate concrete has stones showing at the surface. Too much pressure can loosen stones at the edges, and the surface looks best when cleaned and resealed.
Avoid: High pressure at edges and cracks, which can pop out aggregate.
How often: Clean yearly; reseal every 2-3 years.
Signs you need pool deck cleaning for exposed aggregate
- Slippery spots near the water
- Black or green growth at the edges and in joints
- Rust or leaf stains
- Faded or dirty coating
- Hard-water and chlorine residue
Why it gets dirty
- Constant splashing and standing water
- Sunscreen, body oils and pool chemicals
- Leaves and pool toys left on the deck
- Hard water drying on the surface
What you can do yourself
- Hose off the deck after heavy pool use
- Remove leaves and toys before they stain
- Keep chlorine and acid containers off the deck surface
- Ask us before using any cleaner on a coated or stone deck
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
What can go wrong with DIY pressure washing
- Peeling or etching a coated 'cool deck' surface with high pressure
- Chemicals and wash water getting into the pool
- Pitting travertine with acid cleaners
- Slips on wet, treated surfaces
Our process for pool deck cleaning for exposed aggregate
- Check the deck material and coating
- Protect the pool and nearby plants
- Pre-treat algae and stains with pool-safe methods
- Clean with pressure suited to the surface
- Rinse thoroughly away from the water
Many pool decks have a textured acrylic or 'cool deck' coating. These need lower pressure than bare concrete, and a deck that is peeling may need recoating rather than more cleaning.
Typical pool deck cleaning for exposed aggregate prices
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for exposed aggregate
- Pressure Washing for Exposed Aggregate
- Driveway Cleaning for Exposed Aggregate
- Sidewalk & Walkway Cleaning for Exposed Aggregate
- Patio Cleaning for Exposed Aggregate
- Concrete Sealing for Exposed Aggregate
- Oil Stain Removal for Exposed Aggregate
Pool Deck Cleaning for Exposed Aggregate in Covina, CA
Driveways and patios in California collect oil, dust and tire marks over the long dry season. Cleaning with a surface cleaner and controlling the wash water keeps it out of storm drains.
Some cities in California limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.
We provide pool deck cleaning for exposed aggregate across Covina (ZIP codes 91722, 91723 and 91724) and nearby towns including Citrus (1.7 mi), Charter Oak (2.7 mi), West Covina (3.2 mi) and Azusa (3.2 mi). Call (555) 010-0000 for a free quote in Covina.
Pool Deck Cleaning for Exposed Aggregate: frequently asked questions
How much does pool deck cleaning for exposed aggregate cost in Covina, CA?
Pool Deck Cleaning for Exposed Aggregate typically costs $200-$500 for a typical residential pool deck, and usually takes 1-3 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for pool deck cleaning for exposed aggregate?
For exposed aggregate: usually 1,500-2,500 PSI with a surface cleaner. What we avoid: high pressure at edges and cracks, which can pop out aggregate. We keep the pressure even and controlled, with the right tools for the surface.
Is pool deck cleaning for exposed aggregate safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule pool deck cleaning for exposed aggregate?
Clean yearly; reseal every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.